F60X-6W Load cell

F60X-6W Load cell

$715.00

Bending beam Load cell 10 kg … 500 kg

F60X-6W Load cell

Stainless steel construction hermetically sealed to IP68

Up to 6 000 d OIML approved

Ideally suited for any industrial weighing application where a high accuracy is needed

Optimized alignment as an option

F60X10 C6, F60X20 C6, F60X50 C6, F60X100 C6, F60X200 C6, F60X300 C6, F60X500 C6

PDF Specification

Manufactured: SCAIME.COM

F60X-6W C6

Clear

SKU: f60x-6w-load-cell Category: SCAIME F60X Tags: Bending beam, F60X-6W C6, F60X10 C6, F60X100 C6, F60X20 C6, F60X200 C6, F60X300 C6, F60X50 C6, F60X500 C6, Load cell

Description
Additional information

Description

Bending beam Load cell 10 kg … 500 kg

F60X-6W Load cell

Stainless steel construction hermetically sealed to IP68

Up to 6 000 d OIML approved

Ideally suited for any industrial weighing application where a high accuracy is needed

Optimized alignment as an option

F60X10 C6, F60X20 C6, F60X50 C6, F60X100 C6, F60X200 C6, F60X300 C6, F60X500 C6

PDF Specification

Manufactured: SCAIME.COM

Additional information

Weight	N/A
F60X-6W C6	F60X10 C6, F60X20 C6, F60X50 C6, F60X100 C6, F60X200 C6, F60X300 C6, F60X500 C6
Tech info:	Signal at FS: 2 mV/V ±0.1 % Combined error: ±0.008 %FS Impedance (in/out): 385 Ω ±20 / 350 Ω ±5 Compensated temperature range: -10 … +40°C Overload limit: 150 %Emax (max.: 200 %) Cable/length: 4 shielded wires / 3 m Warranty: 3 years
Options:	± 0.05 %FS signal alignment for F60X "SI" TEST FOR LOAD CELLS ATEX & IECEx – ` II 1 G/D, Ex ia IIC T6 Ga, Ex ia IIIC T80°C Da, IP6X, -20°C < Ta < +60°C (zone 0/20) "n" TEST FOR LOAD CELLS ATEX & IECEx -`II 3 G, Ex nA IIC T6 Gc, -20°C < Ta < +60°C (zone 2) "DUST" MARKING FOR LOAD CELL ATEX & IECEx – ` II 1 D, Ex ta IIIC T125°C Da, IP6X, -20°C < Ta < +60°C (zones 20) FACTORY MUTUAL MARKING FOR SCAIME LOAD CELLS IN HAZARDOUS AREAS

F60X-6W Load cell

You're viewing: F60X-6W Load cell $715.00