SCAIME in USA

AG2.5 PAS – AG100 PAS

skyrom — Fri, 28 Oct 2022 03:14:16 +0000

AG2.5 PAS – AG100 PAS

AG2.5 PAS – AG100 PAS single point load cells for Pennsylvania scale bases and counting scale load cells. 2 mv/v, 0.02% total error, 415/350 ohms, 13 inch cable with connector. Plug and calibrate replacement cells, anodized aluminum. NTEP 91-051 S III 5,000 div capacities 2.5kg, 10kg, 15kg, 30kg, 50kg, 100kg.

Specification sheet attached.

Manufactured: SCAIME.COM

The post AG2.5 PAS – AG100 PAS appeared first on SCAIME-USA.

DVX-C Load cell

skyrom — Thu, 25 Nov 2021 01:55:44 +0000

DVX-C Digital and hygienic load cell

DVX-C load cell - Check-weigher, 15 kg ... 75 kg

Digital load cell with aseptic design, EHEDG certified

Dedicated to high speed filling process control

Load cell made of stainless steel, hermetically sealed IP69K

Max. scale Platform size up to 400 x 400 mm

Weighing capacities 15, 30, 75 kg

Resolution up to 500 000 pts

Part certificate of NAWI (OIML R76) and AWI (OIML R51 and R61)

Integrated weighing functions: High speed transmitter, filling, dosing by unloading

Programmable digital filters

2 digital inputs and 4 digital outputs

1 RS485 output and 1 CANbus output

MODBUS-RTU and CANOpen® protocols

PDF Specification

Manufactured: SCAIME.COM

The post DVX-C Load cell appeared first on SCAIME-USA.

DVX-D Load cell

skyrom — Thu, 25 Nov 2021 00:41:15 +0000

DVX-D Digital and hygienic load cell

DVX-D load cell - Check-weigher, 15 kg ... 75 kg

Digital load cell with aseptic design, EHEDG certified

Dedicated to high speed filling process control

Load cell made of stainless steel, hermetically sealed IP69K

Max. scale Platform size up to 400 x 400 mm

Weighing capacities 15, 30, 75 kg

Resolution up to 500 000 pts

Part certificate of NAWI (OIML R76) and AWI (OIML R51 and R61)

Integrated weighing functions: High speed transmitter, filling, dosing by unloading

Programmable digital filters

2 digital inputs and 4 digital outputs

1 RS485 output and 1 CANbus output

MODBUS-RTU and CANOpen® protocols

(PDF Specification)

Manufactured: SCAIME.COM

The post DVX-D Load cell appeared first on SCAIME-USA.

DVS-D Load cell

skyrom — Wed, 24 Nov 2021 23:25:50 +0000

DVS-D Digital and hygienic load cell

DVS-D load cell - Check-weigher, 15 kg ... 75 kg

Digital load cell with aseptic design, EHEDG certified

Dedicated to high speed filling process control

Load cell made of stainless steel, hermetically sealed IP69K

Max. scale Platform size up to 400 x 400 mm

Weighing capacities 15, 30, 75 kg

Resolution up to 500 000 pts

Part certificate of NAWI (OIML R76) and AWI (OIML R51 and R61)

Integrated weighing functions: High speed transmitter, filling, dosing by unloading

Programmable digital filters

2 digital inputs and 4 digital outputs

1 RS485 output and 1 CANbus output

MODBUS-RTU and CANOpen® protocols

PDF Specification

Manufactured: SCAIME.COM

The post DVS-D Load cell appeared first on SCAIME-USA.

DVS-C Load cell

skyrom — Wed, 24 Nov 2021 01:43:47 +0000

DVS-C Digital and hygienic load cell

DVS-C load cell – Check-weigher, 15 kg … 75 kg

Digital load cell with aseptic design, EHEDG certified

Dedicated to high speed check weighing

Load cell made of stainless steel, hermetically sealed IP69K

Max. scale Platform size up to 400 x 400 mm

Weighing capacities 15, 30, 75 kg

Resolution up to 500 000 pts

Part certificate of NAWI (OIML R76) and AWI (OIML R51 and R61)

Integrated weighing functions: High speed transmitter, dynamic checkweighing

Programmable digital filters

2 digital inputs and 4 digital outputs

1 RS485 output and 1 CANbus output

MODBUS-RTU and CANOpen® protocols

PDF Specification

Manufactured: SCAIME.COM

The post DVS-C Load cell appeared first on SCAIME-USA.

AVX C6 load cell

skyrom — Wed, 24 Nov 2021 00:33:23 +0000

AVX C6 load cell 15 kg … 125 kg

AVX C6 load cell High accuracy stainless steel load cell, 15 kg … 125 kg

Load cell made of stainless steel, hermetically welded IP68/IP69K

Suitable for use in wash down application

Very high accuracy

Approval up to 6 000 d OIML R60 for use in legal for trade weighing applications

Ideally suited for scales or dosing machines used in wet or corrosive environments

Maximum platform size 500×400 mm (<75kg) or 600×400 mm (75kg, 125kg)

Output with cable or M12 connector

Ideally suited in weighing scales, checkweighers and dosing or filling machines construction

Capacities: 15, 30, 75, 125 kg

PDF Specification

Manufactured: SCAIME.COM

The post AVX C6 load cell appeared first on SCAIME-USA.

AVX C3 load cell

skyrom — Mon, 22 Nov 2021 18:24:14 +0000

AVX C3 load cell 15 kg … 125 kg

AVX C3 load cell High accuracy stainless steel load cell, 15 kg … 125 kg

Load cell made of stainless steel, hermetically welded IP68/IP69K

Suitable for use in wash down application

Very high accuracy

Approval up to 6 000 d OIML R60 for use in legal for trade weighing applications

Ideally suited for scales or dosing machines used in wet or corrosive environments

Maximum platform size 500×400 mm (<75kg) or 600×400 mm (75kg, 125kg)

Output with cable or M12 connector

Ideally suited in weighing scales, checkweighers and dosing or filling machines construction

Capacities: 15, 30, 75, 125 kg

PDF Specification

Manufactured: SCAIME.COM

The post AVX C3 load cell appeared first on SCAIME-USA.

eNodView, eNodView 2 – software for eNod

skyrom — Mon, 11 Oct 2021 19:11:48 +0000

Windows PC software for eNod, AAD, DVX, DVS

eNodView, eNodView 2 software for eNod

eNod, AAD, DVX, DVS assistant

eNod1, eNod3, eNod4, AAD, DVX and DVS remote control from a PC

System calibration

Save/Change of all parameters

Measurement acquisition with graphical display

Digital filters simulation

FFT frequency analysis

Data sheet eNodView – Generation 1 of PC software for eNod AAD, DVX, DVS

Data sheet eNodView 2 – PC software for eNod4, AAD, DVX, DVS

Manufactured: SCAIME.COM

eNodView

eNodView Software

For eNod1, eNod3, AAD, DVX, DVS and older eNod4 versions:

eNod1: All versions
eNod3: All versions
eNod4-T: Versions up to V1.23 (T STD) and V211 (T ETH)
eNod4-C: Versions up to V1.11 (C STD) and V211 (C ETH)
eNod4-D: Versions up to V1.08 (D STD) and V209 (D ETH)
eNod4-B: Versions up to V1.06 (B STD) and V209 (B ETH)
eNod4-F: Versions up to V1.06 (F STD) and V209 (F ETH)
AAD, DVX and DVS: All versions

eNodView 2

Discover the new generation of eNodView 2 software:

Expanded and more ergonomic graphical functions
OFF-Line mode to prepare or modify a configuration without connected device
Saving graphic visualizations
Multilingual software available in FR, EN, DE, IT and CN

eNodView 2 available for eNod4, coming soon for AAD, DVX, DVS:

eNod4-T: Versions from V1.21 (T STD) and V207 (T ETH)
eNod4-C: Versions from V1.09 (C STD) and V207 (C ETH)
eNod4-D: Versions from V1.07 (D STD) and V206 (D ETH)
eNod4-B and F: All versions
AAD, DVX and DVS: Scheduled end 2020

The post eNodView, eNodView 2 – software for eNod appeared first on SCAIME-USA.

eNod4-C

skyrom — Wed, 06 Oct 2021 02:46:35 +0000

eNod4-C

eNod4-C Checkweighing, Grading controller

±500 000 d, 1 600 meas/s

Presentation on rail DIN housing

Certification in legal metrology according to OIML R51 for use in automatic checkweigher

Dynamic Checkweighing functions

Up to 8 strain gauge load cells

Load cells failure detection device

Programmable digital filters

2 digital inputs (4 with IO+ option) and 4 outputs

Analog output 0-10V or 4-20mA (IO+ option)

1 USB port for setting by PC

Version with RS485/CAN PLC output and MODBUS-RTU, CANOpen or PROFIBUS-DP protocols

Version with double-Ethernet output and MODBUS-TCP, EtherNet/IP, EtherCAT or PROFINET protocols

Integrated web server for monitoring and remote setting

1 RS485 for eNodTouch touch screen panel

Optional Bluetooth communication

PDF Specification

Manufactured: SCAIME.COM

The post eNod4-C appeared first on SCAIME-USA.

ENODTOUCH-S

skyrom — Fri, 01 Oct 2021 12:29:00 +0000

ENODTOUCH-S

ENODTOUCH-S External Touch screen for eNod4-T/C/D controllers

eNod touch panel Scaime LCD indicator. External touch screen for eNod4-T/C/D controllers.

3″ 4 LCD screen, display 80x40mm. Resistive Touch panel.

Display of measurement and result values. Control of transmitter,

Checkweigher and Dosing applications. Complete eNod4 configuration and calibration.

Simultaneous operation with eNod4 PLC link. RS485 communication port, MODBUS-RTU.

3″4 monochrome LCD screen, display 80x40mm

Resistive Touch panel

Connection of one eNod4 transmitter

Display of measurement and result values

Control of Transmitter, Checkweigher and Dosing applications

Complete eNod4 configuration and calibration

Simultaneous operation with eNod4 PLC link

RS485 communication port, MODBUS-RTU

Manufactured: SCAIME.COM

The post ENODTOUCH-S appeared first on SCAIME-USA.

SCAIME in USA

AG2.5 PAS – AG100 PAS

AG2.5 PAS – AG100 PAS

DVX-C Load cell

DVX-C Digital and hygienic load cell

DVX-D Load cell

DVX-D Digital and hygienic load cell

DVS-D Load cell

DVS-D Digital and hygienic load cell

DVS-C Load cell

DVS-C Digital and hygienic load cell

AVX C6 load cell

AVX C6 load cell 15 kg … 125 kg

AVX C3 load cell

AVX C3 load cell 15 kg … 125 kg

eNodView, eNodView 2 – software for eNod

eNodView, eNodView 2 software for eNod

eNodView

eNod1: All versions

eNod3: All versions

eNod4-T: Versions up to V1.23 (T STD) and V211 (T ETH)

eNod4-C: Versions up to V1.11 (C STD) and V211 (C ETH)

eNod4-D: Versions up to V1.08 (D STD) and V209 (D ETH)

eNod4-B: Versions up to V1.06 (B STD) and V209 (B ETH)

eNod4-F: Versions up to V1.06 (F STD) and V209 (F ETH)

AAD, DVX and DVS: All versions

eNodView 2

eNod4-T: Versions from V1.21 (T STD) and V207 (T ETH)

eNod4-C: Versions from V1.09 (C STD) and V207 (C ETH)

eNod4-D: Versions from V1.07 (D STD) and V206 (D ETH)

eNod4-B and F: All versions

AAD, DVX and DVS: Scheduled end 2020

eNod4-C

eNod4-C

ENODTOUCH-S

ENODTOUCH-S